Last viewed - Retrofitted Pedestrian Signal

File information
Filename:	P8290478.JPG
Album name:	joe_347V / Signal Lights
Keywords:	Traffic_Lights
Company and Date Manufactured:	Fortran Traffic
Lamp Type:	LED, previously incandescent
Filesize:	173 KiB
Date added:	Aug 31, 2010
Dimensions:	1600 x 1200 pixels
Displayed:	264 times
Color Space:	sRGB
Contrast:	0
DateTime Original:	2010:08:29 17:22:23
Exposure Bias:	0 EV
Exposure Mode:	0
Exposure Program:	Program
Exposure Time:	1/320 sec
FNumber:	f/7.9
Flash:	No Flash
Focal length:	17.4 mm
ISO:	100
Light Source:	Unknown: 9
Make:	Olympus Imaging Corp.
Max Aperture:	f/3.6
Model:	FE47,X43
URL:	http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=3268
Favorites:	Add to Favorites

Comment 1 to 8 of 8

Page: 1

GullWhiz

[Aug 31, 2010 at 01:54 PM]

alright....I have actually never seen (in modern times) that Pedestrian Signal had the round lens.....around here we have them in square...

Form109

[Aug 31, 2010 at 09:04 PM]

cool to see a 9 Inch Pedestrian signal with LED's like this...traditionally these 9" PED's were Worded with Walk and Don't walk.

joe_347V

[Aug 31, 2010 at 09:32 PM]

Thanks, over here we have a lot of 9" pedestrian signals with the round lens like this one, some of the newer ones are square but they are still in a 9" housing. I haven't seen any worded ones or the big square ones here before.

Form109

[Aug 31, 2010 at 09:35 PM]

in my area pretty much all new Ped's are the 16x16" Squares with Symbols,the MUTCD allows our older 9" Worded ones to stay as long as they continue to work..but if they go out or absolutely need to be replaced,new ones meeting the MUTCD Standards must be put in.

joe_347V

[Aug 31, 2010 at 10:13 PM]

Cool, I'll have to check the OTM (Ontario MUTCD) here and see what the standards are here for traffic signals but I think that the older worded ones are no longer allowed here. There are some references to them in older drivers manuals from the '90s though.

basilicon89

[Jan 06, 2011 at 02:33 AM]

This is a 12 inch pedestrian signal..

gailgrove

[May 01, 2011 at 11:38 PM]

Yeah, here there will either be a 12 inch square or round lens module, I like the look of the round ones better.

joe_347V

[May 02, 2011 at 12:08 AM]

The GE ones have a square lens but with a rounded centre when the symbol is, odd.

Comment 1 to 8 of 8

Page: 1

Gallery of Lights

Retrofitted Pedestrian Signal

Here's a older pedestrian signal that was retrofitted from incandescent to LED by removing the top incandescent lamp, lens, and reflector and installing a new LED module in it's place that does both the walk and don't walk signals. Note the original incandescent walk signal below the LED one.