Last viewed - Dying LED signal

File information
Filename:	img_0043_(Modified).jpg
Album name:	SeanB~1 / Lamps
Keywords:	Traffic_Lights
Filesize:	349 KiB
Date added:	Feb 20, 2011
Dimensions:	2080 x 2781 pixels
Displayed:	110 times
Color Space:	sRGB
DateTime Original:	2011:02:18 19:07:55
Exposure Bias:	0 EV
Exposure Mode:	0
Exposure Time:	1/8 sec
FNumber:	f/5
Flash:	No Flash
Focal length:	22.929 mm
ISO:	800
Make:	Canon
Max Aperture:	f/5
Model:	Canon PowerShot SX130 IS
URL:	http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=5085
Favorites:	Add to Favorites

Comment 1 to 5 of 5

Page: 1

rjluna2

[Feb 20, 2011 at 11:42 PM]

I have seen similar LEDs failure around my area.

joe_347V

[Feb 21, 2011 at 08:37 PM]

I've seen some LEDs here with only half of them still lit.

LilCinnamon

[Feb 21, 2011 at 08:45 PM]

Me too, The older GELcores that are still being made have that problem.

Sailormoon_01_uk

[Feb 21, 2011 at 09:05 PM]

Here where I live we are still using Traffic Lights with 12v 50w Halogen Lamps, I only have one set due to the huge size see HERE I also have a Pedestrian Crossing Lights too see HERE these look like LED bit are to Halogen they use 12v 50w Halogen Lamps.

All the Best

Colin

SeanB~1

[Mar 15, 2011 at 04:17 PM]

These have been replaced over the weekend with new lamp units.

Comment 1 to 5 of 5

Page: 1

Gallery of Lights

Dying LED signal

One of the original ones, installed around 2005 in a trial. It spends most of the time illuminated on green, as it is a pedestrian crossing with a working call, but in an area with a low amount of foot traffic that wants to cross at the light.