Gallery of Lights


Home Login
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > User galleries > Silverliner14B > Metal Halide Lamps
Return to the thumbnail page FILE 11755/20239 Return to start See previous file See next file Skip to end
POP! This MH lamp has an arc tube that had blown to pieces! Keywords: Misc_Fixtures

POP!

This MH lamp has an arc tube that had blown to pieces!

2011-06-14_00-49-27_435.jpg P1010001.JPG 060111160813.jpg 2011-01-19_18-45-54_396.jpg 2012-11-15_16-51-46_291.jpg
File information
Filename:060111160813.jpg
Album name:Silverliner14B / Metal Halide Lamps
Keywords:Misc_Fixtures
Filesize:150 KiB
Date added:Jun 01, 2011
Dimensions:1088 x 816 pixels
Displayed:259 times
Color Space:sRGB
Contrast:0
DateTime Original:2011:06:01 21:01:31
Exposure Bias:1 EV
Exposure Mode:0
Exposure Time:9/3925 sec
FNumber:f/2.8
Flash:No Flash
Focal length:4.97 mm
ISO:104
Light Source:D55
Make:Motorola
Max Aperture:f/2.8
Model:DROIDX 7daa00017ff00000015a7d751702002d
URL:http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=6721
Favorites:Add to Favorites

Comment 1 to 18 of 18
Page: 1

rjluna2   [Jun 01, 2011 at 11:29 PM]
Now that is really scary Shocked
gailgrove   [Aug 19, 2011 at 10:37 PM]
This isn't scary the lamp is in an enclosed fixture, now what IS scary is the 1KW MH lamp I saw exploded in an open highbay!
joe_347V   [Aug 20, 2011 at 12:03 AM]
@Niall: Shocked that must have been loud even if the outer didn't break.
gailgrove   [Aug 20, 2011 at 06:40 PM]
I should of clarified that, I didn't see it happen but I saw the aftermath - the outer jacket was broken! The highbay had also been unplugged from the twist lock receptacle for some reason, why they didn't replace the lamp while they where up there is beyond me Rolling Eyes
streetlight98   [Aug 20, 2011 at 06:56 PM]
Maybe they didn't have the lamp in stock or soething else is wrong like the ballast or cap.
gailgrove   [Aug 20, 2011 at 07:00 PM]
Well the store usually replaces the lamps very quickly when the go out, but I get the feeling it is done by the store staff, my guess is they figured something is wrong with the fixture and they will (possibly already have) get an electrician to look at it.
streetlight98   [Aug 20, 2011 at 07:06 PM]
Very few stores here use HID now. Before 2008, many stores used HID, but now it's mainly T8 or T5 fluorescent.
gailgrove   [Aug 20, 2011 at 07:29 PM]
Here some stores converted to fluorescent recently but many are still HID, in fact one store that was built three years ago got all HID highbays!
joe_347V   [Aug 20, 2011 at 08:02 PM]
I've noticed that Best Buy and some Rona stores are still HID but the local Loblaws, HD, and Canadian Tire are now fluorescent.
streetlight98   [Aug 20, 2011 at 09:29 PM]
Some stores built about two years ago had PMH highbays, then randomly a couple months later fluorescent ones took over. I wonder why they just didn't put up the fluorescent ones in the first place. The Best Buys here are still HID too.
rlshieldjr   [Aug 20, 2011 at 09:55 PM]
I am regularly replacing MH with burst arc tubes, and some times they break the outers. Usually it is from horizontal burning of "U" lamps.
streetlight98   [Aug 20, 2011 at 10:24 PM]
isn't U for universal?
joe_347V   [Aug 20, 2011 at 11:21 PM]
Yeah but they still aren't that good when burned horizontal, the horizontal ones with the "arched" arc tube or CMH would be better IMO.
gailgrove   [Aug 20, 2011 at 11:22 PM]
Too bad there isn't a 1KW CMH lamp yet.
Silverliner14B   [Aug 23, 2011 at 05:22 AM]
@gailgrove, there is now an 830w BT56 CMH designed to operate on 1kw MH ballasts. See here.
joe_347V   [Aug 23, 2011 at 06:17 AM]
Interesting stuff Dave, according to here it also works on probe start ballasts.
gailgrove   [Aug 24, 2011 at 06:10 PM]
Quite interesting!
streetlight98   [Aug 24, 2011 at 11:16 PM]
If it can work on 1000w probe MH ballasts, does it also work on MV ballasts?

Comment 1 to 18 of 18
Page: 1
Powered by Coppermine Photo Gallery