Gallery of Lights


Home Login
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > User galleries > joe_347V > Southern Ontario Streetlights
Powerlite B2215s
Here's a couple of Powerlite B2215s at a small parking lot in [url=http://maps.google.ca/maps?hl=en&ll=44.388056,-79.693623&spn=0.00759,0.020964&t=m&z=16&vpsrc=6&layer=c&cbll=44.387968,-79.693557&panoid=0ZdC2WmoyTJcfNfsXqGqgw&cbp=12,15.29,,2,-26.04]Barrie.[/url] 

There's not a lot of these left here, the only place that still uses them for streetlighting is parts of Kitchener-Waterloo but those have been refitted to HPS. 
Keywords: American_Streetlights

Powerlite B2215s

Here's a couple of Powerlite B2215s at a small parking lot in Barrie.

There's not a lot of these left here, the only place that still uses them for streetlighting is parts of Kitchener-Waterloo but those have been refitted to HPS.

P2234491.JPG PC134293.JPG P8232682.JPG P9032877.JPG P9032840.JPG
File information
Filename:P8232682.JPG
Album name:joe_347V / Southern Ontario Streetlights
Keywords:American_Streetlights
Company and Date Manufactured:Powerlite Devices
Model Number:B2215
Filesize:125 KiB
Date added:Oct 22, 2011
Dimensions:1600 x 1200 pixels
Displayed:174 times
Color Space:sRGB
Contrast:0
DateTime Original:2011:08:23 14:50:13
Exposure Bias:0 EV
Exposure Mode:0
Exposure Program:Program
Exposure Time:1/200 sec
FNumber:f/10.8
Flash:No Flash
Focal length:75 mm
ISO:100
Light Source:Unknown: 0
Make:Olympus Imaging Corp.
Max Aperture:f/3.5
Model:SP600UZ
URL:http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=8982
Favorites:Add to Favorites

Comment 1 to 6 of 6
Page: 1

streetlight98   [Oct 22, 2011 at 11:50 PM]
Looks like the tapered E arms are welded to the pole top. Shocked Looks as if there used tobea few floods on the pole too.
joe_347V   [Oct 23, 2011 at 12:03 AM]
The arms aren't welded, they just have a oddly shaped triangular mount on them. And yeah that bracket on the top looks like it was used for a trio of floods.
streetlight98   [Oct 23, 2011 at 12:16 AM]
Ahh. i see now. I didn't look closely and mistook the mounting plate for a weld. Also note the added service entrance too. Here they will attatch the wire to the very top of the pole and have the wires go through the wire feed hole on the bottom of the arm. They seem to have did it the hard way here but it's better than drilling the fixture. Shocked Rolling Eyes
joe_347V   [Oct 23, 2011 at 01:19 AM]
I've never seen them drill fixtures iin my area for temp feeds but Niall told me he'd seen it before in his area. Most of our crews also feed in through the bottom of the arm or the slipfitter but this one is just ridiculous. Rolling Eyes
streetlight98   [Oct 23, 2011 at 02:06 AM]
Fourtunatly they're too lazy to drill holes in fixtures here. They don't feed it through the bottom of the slipfitter either. They feed it through the arm, which looks better. It actually makes overhead wireing look good when it's done right.
joe_347V   [Oct 23, 2011 at 03:18 AM]
Yeah, I don't overheads feeds that are neater like this.

Comment 1 to 6 of 6
Page: 1