ITT Model 25 FCOs - Back of model 25 door.

File information
Filename:	DSCN5090.jpg
Album name:	Lil'Cinnamon / ITT Model 25 FCOs
Keywords:	American_Streetlights
Filesize:	113 KiB
Date added:	Oct 18, 2011
Dimensions:	1000 x 477 pixels
Displayed:	55 times
Color Space:	sRGB
Contrast:	0
DateTime Original:	2011:10:17 21:51:08
Exposure Bias:	0 EV
Exposure Mode:	0
Exposure Program:	Program
Exposure Time:	1/30 sec
FNumber:	f/3.3
Flash:	Compulsory Flash
Focal length:	6.3 mm
ISO:	100
Light Source:	Unknown: 0
Make:	Nikon
Max Aperture:	f/3.2
Model:	COOLPIX S51
URL:	http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=8924
Favorites:	Add to Favorites

Comment 1 to 6 of 6

Page: 1

LilCinnamon

[Oct 18, 2011 at 06:38 PM]

I need to find an FCO glass for this... or I can cut one myself.. xD The one currently in this is the M-400 R3 flat (plexi)glass. It surprisingly fits in well. Well the Model 25 and M-400 R3 and 125 all use the same refractors.

I still want the refractors for these lights, but I am gona get one from Tony. or if I am lucky I can find one on the ground, cause surely, David F finds refractors on the ground all the time! xD

streetlight98

[Oct 18, 2011 at 08:40 PM]

Trace the M-400 FCO glass and take it to a hardware store or a place that cuts glass. I wouldn't advise doing it yourself.......

LilCinnamon

[Oct 18, 2011 at 09:00 PM]

I didn't say I WAS gonna do it myself. xD

It would be hard and all of that.

streetlight98

[Oct 18, 2011 at 09:19 PM]

what does "or I can cut one myself" mean then! Rolling Eyes

LilCinnamon

[Oct 18, 2011 at 09:46 PM]

I meant that I can have someone cut it. It means I can get one cut instead of buying a factory one. xD

I worded that wrong.

joe_347V

[Oct 19, 2011 at 06:22 AM]

Well I guess if you have a band saw you could cut a plexiglass one by yourself.

Comment 1 to 6 of 6

Page: 1

Gallery of Lights

Back of model 25 door.

Here is the back, as you see it's very rusted and corroded. This HAS been in service since the 80's I presume.