Gallery of Lights


Home Login
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Public Albums > Misc Fixtures
Return to the thumbnail page FILE 983/1183 Return to start See previous file See next file Skip to end
MV ballast stuffed into the yardblaster head This is the 175w Magnetek MV ballast (multi-tap) stuffed in the yardblaster head. It was a PITA to get it up in there. Had to remove a lot of the unused wires. Also had to enlarge the hole in the refractor for the mogul socket to fit. I put a coated merc in it, but it looks weird (too green). Think the bulb might be defective. Keywords: Misc_Fixtures

MV ballast stuffed into the yardblaster head

This is the 175w Magnetek MV ballast (multi-tap) stuffed in the yardblaster head. It was a PITA to get it up in there. Had to remove a lot of the unused wires. Also had to enlarge the hole in the refractor for the mogul socket to fit. I put a coated merc in it, but it looks weird (too green). Think the bulb might be defective.

imlbdb_27_58.JPG web4.jpg web5.jpg web6.jpg DSC04859.JPG
File information
Filename:web5.jpg
Album name:gramirez2012 / Misc Fixtures
Keywords:Misc_Fixtures
Company and Date Manufactured:GE
Model Number:M250R2
Wattage:175 or 250
Lamp Type:Mercury Vapor
Filesize:109 KiB
Date added:Apr 07, 2011
Dimensions:768 x 1024 pixels
Displayed:164 times
URL:http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=5956
Favorites:Add to Favorites

Comment 4 to 23 of 23
Page: 1 - 2

gramirez2012   [Apr 08, 2011 at 02:37 AM]
YES! when first turned on, the lamp has a VERY dim bluish tint to it! Can a CWA be run without the cap?
gmercury2000   [Apr 08, 2011 at 02:39 AM]
Yea and when the cap's are going bad they will stay dim and bluish depending on how bad the cap is. Is the ballast new or used? I've seen them bad to the point where the lamp will just stay pink like at first start up and just glow pink
gramirez2012   [Apr 08, 2011 at 02:41 AM]
New-Old stock. Never used, but date on the box is from 1993.
gmercury2000   [Apr 08, 2011 at 02:43 AM]
Did you check to make sure you have proper voltage? Even with the ballast from 93 that shouldnt effect anything, unless maybe you got a bad cap! Also could be a defective lamp
gramirez2012   [Apr 08, 2011 at 02:45 AM]
Definitely have the proper input voltage. I haven't measured the voltage at the socket. Wonder what the shelf-life is for those caps? I have a known-good lamp that seemed to exhibit weird behavior as well.
gmercury2000   [Apr 08, 2011 at 02:48 AM]
I've personally never heard of a cap having a shelf life but not saying they cant. I was looking at the other pic you have of the cap installed. It looks like it's possibly making contact with other terminals on the ballast. Double check and make sure it's not. Just an idea! I dont know if that would affect operation or not
gramirez2012   [Apr 08, 2011 at 02:51 AM]
Hmm I hadn't thought of that. I'm going to disconnect the cap and see what happens.
gmercury2000   [Apr 08, 2011 at 02:53 AM]
Well the cap is in line with the lamp so if you disconnect it the lamp will not light. I mean the casing of the cap contacting the other voltage taps on the ballast
gramirez2012   [Apr 08, 2011 at 02:56 AM]
I meant connect the lamp to the ballast without the cap in between. I think there is also the possibility that the cap casing is coming in contact with the other leads on the ballast
gmercury2000   [Apr 08, 2011 at 02:57 AM]
Ah ok I know what you mean, yea and see if the lamp comes to full brightness! I do that in the field sometimes to see if the cap is bad.
GullWhiz   [Apr 08, 2011 at 03:55 AM]
For the lamp....look inside see what arc tube looks like...if it has white paint on the ends of the arc tube...its a MH..but no white paint..its MV Wink
gramirez2012   [Apr 08, 2011 at 01:17 PM]
Can't tell - It's a coated lamp.
GullWhiz   [Apr 08, 2011 at 01:56 PM]
the neck area is clear look inside the neck area....you'll be able to see from the neck...all HID lamps I have seen always have clear necks
gramirez2012   [Apr 08, 2011 at 02:45 PM]
UPDATE: It ran for several hours and still looked dim. I turned it off, and when I took out the bulb, it was insanely hot (felt like it was burning through my glove). I put in a known good, clear bulb and it showed the same startup symptoms: Dim blue light, and I could see the arc tube this time. Warming up very slowly. I took a volt meter to the socket and measured 220v (the meter doesn't have 240 for some reason). It seems like the lamps are being underpowered.
A_lights   [Aug 23, 2011 at 02:06 AM]
the problem is the extreme heat from the lamp and ballast!this is killing the capacitor
CWA ballasts in streetlights always have the capacitor away from the lamp and ballast
streetlight98   [Sep 29, 2011 at 10:32 PM]
Yeah. Don't use ballasts with capacitors in a NEMA head. It won't work as long. You would be better off mountign the ballast inside the shed that this is mounted on and run the wires through the shed or mount the ballast in a remote housing so the heat from the lamp doesn't harm it.
joe_347V   [Sep 29, 2011 at 11:09 PM]
The Toronto MH gumballs have plastic caps stuffed into the head, that can't be good for it. Shocked
streetlight98   [Sep 29, 2011 at 11:17 PM]
Are you sure the balasts aren't HX? HX don't need caps.
joe_347V   [Sep 29, 2011 at 11:22 PM]
They're probably HX ballasts with caps, most low wattage multitap MH ballasts are like that. I was a bit surprised to see a cap stuffed inside the head.
streetlight98   [Sep 29, 2011 at 11:25 PM]
I didn't know a CWA ballast would fit inside here...

Comment 4 to 23 of 23
Page: 1 - 2
Powered by Coppermine Photo Gallery