Gallery of Lights


Home Login
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > User galleries > joe_347V > Signal Lights
Return to the thumbnail page FILE 259/20560 Return to start See previous file See next file Skip to end
[Gone] The Last 8-8-8 in Toronto Here's what I believe to be the last 8-8-8 traffic signal left in Toronto, there are two other 8-8-8s left but they either have 3M adapters on it or louvers. This one is for pretty busy crosswalk downtown and is still incandescent along with the rest of the signals at this crosswalk. Note the slight browning on the green lens since this signal defaults to green. This signal was removed and replaced with a Fortran traffic poly 12-8-8 and the other signals retrofitted to LED sometime around early February 2012, it was one of the last 8-8-8s in Toronto... Keywords: Traffic_Lights

[Gone] The Last 8-8-8 in Toronto

Here's what I believe to be the last 8-8-8 traffic signal left in Toronto, there are two other 8-8-8s left but they either have 3M adapters on it or louvers. This one is for pretty busy crosswalk downtown and is still incandescent along with the rest of the signals at this crosswalk. Note the slight browning on the green lens since this signal defaults to green.

This signal was removed and replaced with a Fortran traffic poly 12-8-8 and the other signals retrofitted to LED sometime around early February 2012, it was one of the last 8-8-8s in Toronto...

Flea Market and Stuff 010.JPG 106.JPG PB023817.JPG CIMG4981.JPG COL_IMG_1071_M.JPG
File information
Filename:PB023817.JPG
Album name:joe_347V / Signal Lights
Keywords:Traffic_Lights
Company and Date Manufactured:Canadian General Electric
Wattage:60-69w
Lamp Type:Incandescent
Filesize:262 KiB
Date added:Nov 03, 2011
Dimensions:1600 x 1200 pixels
Displayed:609 times
Color Space:sRGB
Contrast:0
DateTime Original:2011:11:02 11:14:51
Exposure Bias:0 EV
Exposure Mode:0
Exposure Program:Program
Exposure Time:1/60 sec
FNumber:f/4.7
Flash:No Flash
Focal length:19 mm
ISO:100
Light Source:Unknown: 0
Make:Olympus Imaging Corp.
Max Aperture:f/3.5
Model:SP600UZ
URL:http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=9279
Favorites:Add to Favorites

Comment 1 to 11 of 11
Page: 1

streetlight98   [Nov 03, 2011 at 10:19 PM]
Nice. We have some 12/12/12 crosswalk signals here with green. Most are 12/12/8. The top being 12" red, middle being 12" yellow, and bottom being 8" flashing yellow. The flashing yellow is default.
joe_347V   [Nov 03, 2011 at 10:40 PM]
Hmm all our signals default to green instead of flash but I've noticed that some places in the US flash their signals that rarely change.
streetlight98   [Nov 03, 2011 at 11:56 PM]
The reason behind flashign the yellow is so it's not confused with a light that's turnign red. The reason why the ped X-ing signals aren't green here (the really old ones are however) is so it's not confused with an intersection.

The lights flashes yellow in the bottom 8" yellow section. a pedestrian pushes the cross button. The 12" steady yellow comes on in the middle section. After 3-5 seconds, the 12" red on top turns on. Then after some time, the flashign yellow bottom section comes on again. Can't find any pics so i'll create one........
joe_347V   [Nov 04, 2011 at 01:15 AM]
I'm not a fan of signals defaulting to flashing yellow, they tend to cause drivers to get confused at first. The BC system of slowly flashing the green is good...although that would cause confusion in Ontario since flashing green means protected left.
streetlight98   [Nov 04, 2011 at 01:28 AM]
Flashing green is unheard of hear. We never flash green lights. Only red and yellow. I don't mind the flashing yellow. I don't know why you say it causes confusion though. It does what it's supposed to- make motorists slow down because of a crosswalk.
joe_347V   [Nov 04, 2011 at 02:02 AM]
Ontario drivers generally aren't used to seeing flashing yellows, we only ever use them when the controller fails. Laughing
streetlight98   [Nov 04, 2011 at 02:21 AM]
Ahh. sometimes when the police direct traffic, the light isn't needed anymore, etc, it will flash. When a signal is first installed, the main road flashes yellow and the side road (and arrows if there are any) will flash red until they program the electronics.
joe_347V   [Nov 04, 2011 at 02:27 AM]
They usually keep the lights off when they're programming the controller here.
TiCoune66   [Nov 04, 2011 at 02:35 AM]
I have recently seen the last school 4-way light in my neighbourhood being installed back, it has been repainted and relamped ... with incandescents! Shocked
streetlight98   [Nov 04, 2011 at 02:36 AM]
They get to eager here lol. The signals are connected to power by the electric company and the DOT puts in the equippement and programs the signals. I don't know if the traffic signals here are serviced by the State or City in RI. I think the State, but I could be wrong.....
joe_347V   [Feb 08, 2012 at 04:03 PM]
Update: this has been replaced with a Fortran 12-8-8 wih those new style Dialight LEDs. Rolling Eyes

They also changed the mast arm and retrofitted the red and ambers on 12-8-8 on the other side to LED using the same Dialight module. The greens were left incandescent because they had 3M adapters and couldn't be retorfitted.

-----[04 Nov 2011 at 3:40]-----
You have a 4 way in your area Vince. Shocked

Comment 1 to 11 of 11
Page: 1
Powered by Coppermine Photo Gallery