Gallery of Lights


Home Login
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > User galleries > Mike > My General Electric M-250A2 FCO (1987)
Return to the thumbnail page FILE 139/1263 Return to start See previous file See next file Skip to end
Classic 1980s NEES Set-Up Here's my M-250A2 installed on my 6ft cantilever arm. This was THE set-up of the 1980s around here for street lighting. NEES (Narragansett Electric, NECo) installed these arms by the thousands in the 80s, almost all of them with one of these M-250A2 FCOs. Ironically, the arm is actually from Taunton, MA, which has a municipal utility, but they coincidentally used these same arms at some point! I think in Taunton they would have put NEMA heads on these though. When I eventually get my own place, I will be installing this exact set-up in my backyard. Keywords: American_Streetlights

Classic 1980s NEES Set-Up

Here's my M-250A2 installed on my 6ft cantilever arm. This was THE set-up of the 1980s around here for street lighting. NEES (Narragansett Electric, NECo) installed these arms by the thousands in the 80s, almost all of them with one of these M-250A2 FCOs. Ironically, the arm is actually from Taunton, MA, which has a municipal utility, but they coincidentally used these same arms at some point! I think in Taunton they would have put NEMA heads on these though. When I eventually get my own place, I will be installing this exact set-up in my backyard.

080516_008.JPG 080516_010.JPG 080516_013.JPG 080516_011.JPG 080516_014.JPG
File information
Filename:080516_013.JPG
Album name:Mike / My General Electric M-250A2 FCO (1987)
Keywords:American_Streetlights
Filesize:668 KiB
Date added:Aug 05, 2016
Dimensions:2048 x 1536 pixels
Displayed:117 times
URL:http://www.galleryoflights.org/mb/gallery/displayimage.php?pid=20892
Favorites:Add to Favorites

Comment 1 to 2 of 2
Page: 1

GullWhiz   [Aug 20, 2016 at 08:17 PM]
What brand is this arm? we have some arms here in BGE with similar bracket mounts but as 4 footers instead, with HAPCO (older) and Curlee (newer) truss arms for 10, 15 and 20 foot, I also suspect some 12 footers too.
streetlight98   [Aug 20, 2016 at 11:40 PM]
I'm not sure. There are no markings anywhere on this arm. Maybe there was a label or something at some point but it was either removed when it was installed or it fell off in service. No residue from a label though. We have some 6ft and 10ft GE tapered elliptical arms (or HAPCO?) and we have lots of 12ft HAPCO truss arms. A few 15ft and 10ft trusses too. They currently use 2" HAPCO upsweep arms but we have lots of 1-1/4" upsweep arms from the incandescent days.

Any arms smaller than 6ft are also from the incandescent days. Oh, and we have 6ft and 8ft underbraced upsweep arms that were used in the 50s through the mid-60s. By 1965-ish they were using the tapered arms and trusses. Almost all the arms here are aluminum. There were some old rusty steel arms from the incandescent era and in the early 90s they used quite a few 6ft 1-1/4" galvanized steel pipe arms (similar to the style above and also upsweep) but by the late 90s they'd switched back to the aluminum, but using 2" upsweep instead.

I actually have one of those very 6ft 2" upsweep arms made in 2015 by HAPCO! Got it from an electrician friend who got it from his friend at NGrid (the electric company here).

Comment 1 to 2 of 2
Page: 1
Powered by Coppermine Photo Gallery