175W MV, 120V. Untested as of this time, but it worked when it was removed. I need to take it apart, wash it out, and rewire it before testing it. A little fun fact: The reflectors on these were painted hammered silver on the outside like the casting! The inside of the reflector was possibly painted white. I see some white paint on the inside. Not sure if Joe added that or if it's original. Looks like it was done with spray paint.
If it was me I'd leave everything inside when I clean it. To avoid breaking off any screws. You could always drill out the screws though and re-thread the housing. But still. Then everything wouldn't be original.
If the screes get stuck I won't remove them, simple as that. But if they DO come out, then I will disassemble the light best I can and clean it. The slipfitter bolts do have to come out though. I'll probably use a torch and vice grips like I did with the boxy OV-15.
Nice! I generally try to disassemble my used fixtures when I clean them. If any screws are struck I'll spray some penetrating oil and leave it overnight.
Login
