Home     Back to forums     Login
Album list     Last uploads     Last comments     Most viewed     Top rated     My Favorites     Search
Home > User galleries > lite_lover > Street Light Fixtures In My Collection
Click to view full size image

Hubbell RMC LED

Here is a Hubbell RMC 68W LED streetlight.

Made in: Christiansburg, VA. USA

Manufactured: Feb. 2012

Abandoned_R7_Clarington2COnt_.PNG AE_Low_Pressure_sodiums2C_3300_Sheffield_Ave__Hammond2CIN.PNG DSC06358_Hubbell_RMC_68W_LED.JPG DSC02178_GE_175W_Mercury_201-SA.JPG DSC02309_Paralta_Equip_Co_Barricade_Light.JPG
File information
Album name:lite_lover / Street Light Fixtures In My Collection
Company and Date Manufactured:Hubbell
Model Number:RMCT48LU5K02013503
Lamp Type:LED
Filesize:70 KiB
Date added:Dec 26, 2013
Dimensions:1024 x 768 pixels
Displayed:244 times
Color Space:sRGB
DateTime Original:2013:10:18 15:39:27
Exposure Bias:0 EV
Exposure Mode:0
Exposure Program:Program
Exposure Time:1/125 sec
Flash:No Flash
Focal length:23.7 mm
Light Source:Unknown: 0
Max Aperture:f/2.8
Favorites:Add to Favorites

Comment 1 to 15 of 15
Page: 1

streetlight98   [Dec 26, 2013 at 11:53 PM]
Ahh an LED street light that doesn't look like you-know-what! it still needs a drop lens though lol. See, they make LED traffic signal modules that look like the old incandescents so why can't they throw on a nice drop lens and make the street light complete? Laughing

lite_lover   [Dec 27, 2013 at 03:19 AM]
Yes, nice to at least have LED in a good looking fixture instead of looking like a you-know-what lol. Very Happy An LED module in a drop lens shape would look pretty good! Cool

joe_347V   [Dec 29, 2013 at 03:58 AM]
Nice! I also like the LED OVHs too since they look like cobraheads instead of shovels. I wonder if it's possible to use a drop lens as a cover for the LED module.

lite_lover   [Dec 29, 2013 at 11:21 AM]
Thanks Joe! Yes the LED cobraheads look much better than the shovels or steam irons Laughing I haven't tried out a drop lens on this,but it may work if one made a couple clips to hold both the LED module and drop lens rim down together.

streetlight98   [Dec 29, 2013 at 03:25 PM]
yeah you should try a drop lens on this. I think they come from the factory with GE styled plastic lenses but they look much better with Lexalite/Powerlite/American Electric plastic lenses.

lite_lover   [Jan 01, 2014 at 02:32 AM]
I took a look at the fixture to see if a drop lens could be used,but unfortunately the two notches on the front of the refractor door won't allow anything thicker to slide in other than just the rim of a drop refractor or the rim of the LED module.

streetlight98   [Jan 01, 2014 at 03:47 AM]
Hmm what you could do is stick some shims in between the drop refractor and the LED module (you could gasket it to prevent dirt/dust in the refractor but it would only be experimental anyways) and then clamp the LED module and lens together. use the shims to separate the refractor lip and the LED module just enough so that the refractor lip and fit into the tabs in the door. It might work. I don't know what the LED module looks like though so hopefully there's enough clearance between the top of the module and the inside of the top housing.

lite_lover   [Jan 01, 2014 at 04:33 AM]
Probably the easiest way would be to attach foam weather strip to the lip of the LED module,then rest the module over the drop lens mounted in the refractor door. It's a pretty small gap and would give it a good seal, making different hold down tabs on the hinge end of the refractor door would then keep it in place.

streetlight98   [Jan 01, 2014 at 04:37 AM]
ahh yeah that sounds much easier. You could be the next multi-millionaire with this geneous invention that no one else has seem to come up with: a DROP LENS LED LIGTH! lol I don't know why manufacturers aren't catching on... I suppose the IDA had something to do with this. Razz Rolling Eyes Mad Laughing

Happy early New Year too! I have about 20 minutes 'til 2014 here but i think you still have three hours and 20 minutes right?

Antstar85   [Jan 01, 2014 at 06:16 AM]
NICE!!!!! Did this happen to be the one on eBay? I was watching that one lol but glad someone got it. Have you lit this up to see how it looks.

lite_lover   [Jan 01, 2014 at 10:23 AM]
Thanks, yes this one was on eBay, it looks pretty good,nice a bright actually.

Thanks Mike! Happy New Year to you too! Yes I have 3 hours and 20 mins to go at the time of your comment. Yes probably something to do with IDA to stick with the full cut off design.

xmaslightguy   [Feb 17, 2017 at 02:23 AM]
Looks quite nice Smile

How's the brightness & color?

lite_lover   [Feb 17, 2017 at 04:32 AM]
It gives off a good amount of light,the color is pure white.

streetlight98   [Feb 17, 2017 at 11:09 AM]
At a little over 6000 lumens, the white light should make it appear a little brighter than 70W HPS. Maybe more like 175W MV or 100W HPS?

lite_lover   [Feb 18, 2017 at 03:36 AM]
Yes, it would be pretty close to 100W HPS or 175W MV

Comment 1 to 15 of 15
Page: 1