Sorry Darren, you are wrong! and we don't get many trims around here, not really a requirements for MD......

Is there supposed to be a traffic light straight ahead as well?

Wrong again!....

Is that 125 missing its lens? Or is it FCO.

It's not a 125...its a GE M-400A3 and is not missing a glass or a FCO either...it's a sag lens....and no it's not the problem.....anybody else want to give a try?

Does it have anything to do with Streetlights at all?.....ill give it a try....the Truss Arm looks Brown...

OVX has a missing glass lens?

@Form109 Whats wrong with truss arm being brown??? i dont see anything wrong with a truss arm being brown

Ian...no the OVX is a FCO

keep trying guys.......you guys need to reallllly look carefully to find whats wrong........my eyes was keen enough to notice it....

whats Wrong with it is that the Arm and Fixture are Brown..but the Pole and Traffic Signal Mast are a Bare Galvanized Finnish.....but since thats not it...ill give it Yet another Try...

1. The Signals are Yellow...but the Visors are Black.

2. The Pedestrial Signals

3. That Maryland 198 Highway Shield

Looks like some paint is chipped off on the mast between the traffic lights.

I agree with form109 that Maryland 198 Highway Shield has a odd looking west and arrow tab on it. I also think that the truss arm had too much wire sticking out of it.

"1. The Signals are Yellow...but the Visors are Black."

The Traffic light that I have is like that. The back is yellow, and the visors are black. In Aurora, ALL of the traffic lights are like that. And The busted traffic light I have IS from Aurora, so that explains it.

but you all are wrong....on what I am looking at....it's time for a hint....it's related to the truss arm on the traffic light mast.......so look in that area....

And Form109....Mast is actually brown.....it's just the sun...

Wires hanging down.

Loose connection? I noticed the wires before, wasn't sure though.

EDIT:

I GOT IT! The bottom arm bracket is missing the other side, and there are no screws.

finally Ian you got it!!!

Yayz! 8D

I hope it doesn't Fall! O.o

O.O good eye Ian!! I couldn't even zoom the pic in enough to tell the back part of the clamp was missing.

I don't think it will fall out....the worst case...is it may slowly slip down first,,,,,,top isn't tight.......I mean they can indeed hold on just fine with one clamp as I've seen some longer arms which aren't ttruss arms have clamp and plus becsause its a truss arm and bottom mount weight holds on to the pole helps

can't see the pic anymore.

Now you see it!